  | |||||||||
Click on an image below to enlarge:
|
CL4 - Spare Barrel Anchor
CL4 Spare Barrel Anchor™
Because everyone loses something from time to time.
This is a spare/replacement barrel anchor for an existing CL4 Holster system. CL4 barrel anchors are machined from virgin grade Teflon® to help ensure a smooth, flexible, and friction-free draw. They are also impervious to moisture, perspiration, and solvents. They come with an attached tethering cord that is made from Dyneema® — Dyneema is 15 times stronger than steel, light enough to float on water, and has an unlimited flex-life.
WARNING - CL4 barrel anchors are sold separately to supplement an existing holster system. They should only be used in conjunction with a properly fitted trigger shroud. Using this device without a trigger shroud in place could potentially result in an unintentional discharge of your firearm.
Barrel Anchor
| Material | Virgin Grade Teflon® |
| Water Absorption, 24 hours (%) | <.01 |
| Tensile Strength (psi) | 3,900 |
| Flexural Strength (psi) | No Break |
| Coefficient of Linear Thermal Expansion (x 10-5 in./in./°F) | 7.5 |
| Melting Temp (°F) | 635 |
| Max Operating Temp (°F) | 500 |
| Coefficient of Friction | .04 |
Connection Loop
| Core Material | Dyneema® |
| Sleeve Material | Polyester |
| Outside Diameter (mm) | 1.19 |
| Tensile Strength (lbs) | 345 |
| Dry/Wet Conditions | Wet Strength = Dry Strength |
| Chemical/Solvent Resistance | Excellent |
| Resistance to Acids/Alkali | Excellent |
| Resistance to Abrasion/Cuts/Stretching | Excellent |